Type Alias PostRebuildNodeBalancerConfigResponses

type PostRebuildNodeBalancerConfigResponses = {
    "200":
        | {
            algorithm?: "roundrobin"
            | "leastconn"
            | "ring_hash";
            check?: "none" | "connection" | "http" | "http_body";
            check_attempts?: number;
            check_body?: string;
            check_interval?: number;
            check_passive?: boolean;
            check_path?: string;
            check_timeout?: number;
            cipher_suite?: string;
            id?: number;
            nodebalancer_id?: number;
            nodes_status?: { down: number; up: number };
            port?: number;
            protocol?: "udp";
            proxy_protocol?: string;
            ssl_cert?: string | null;
            ssl_commonname?: string;
            ssl_fingerprint?: string;
            ssl_key?: string | null;
            stickiness?: "none" | "session" | "source_ip";
            udp_check_port?: number;
            udp_session_timeout?: number;
        }
        | {
            algorithm?: "roundrobin"
            | "leastconn"
            | "source";
            check?: "none" | "connection" | "http" | "http_body";
            check_attempts?: number;
            check_body?: string;
            check_interval?: number;
            check_passive?: boolean;
            check_path?: string;
            check_timeout?: number;
            cipher_suite?: string;
            id?: number;
            nodebalancer_id?: number;
            nodes_status?: { down: number; up: number };
            port?: number;
            protocol?: "tcp";
            proxy_protocol?: "none" | "v1" | "v2";
            ssl_cert?: string | null;
            ssl_commonname?: string;
            ssl_fingerprint?: string;
            ssl_key?: string | null;
            stickiness?: "none" | "table" | "http_cookie";
        }
        | {
            algorithm?: "roundrobin"
            | "leastconn"
            | "source";
            check?: "none" | "connection" | "http" | "http_body";
            check_attempts?: number;
            check_body?: string;
            check_interval?: number;
            check_passive?: boolean;
            check_path?: string;
            check_timeout?: number;
            cipher_suite?: string;
            id?: number;
            nodebalancer_id?: number;
            nodes_status?: { down: number; up: number };
            port?: number;
            protocol?: "http";
            proxy_protocol?: string;
            ssl_cert?: string | null;
            ssl_commonname?: string;
            ssl_fingerprint?: string;
            ssl_key?: string | null;
            stickiness?: "none" | "table" | "http_cookie";
        }
        | {
            algorithm?: "roundrobin"
            | "leastconn"
            | "source";
            check?: "none" | "connection" | "http" | "http_body";
            check_attempts?: number;
            check_body?: string;
            check_interval?: number;
            check_passive?: boolean;
            check_path?: string;
            check_timeout?: number;
            cipher_suite?: "recommended" | "legacy";
            id?: number;
            nodebalancer_id?: number;
            nodes_status?: { down: number; up: number };
            port?: number;
            protocol?: "https";
            proxy_protocol?: string;
            ssl_cert?: string | null;
            ssl_commonname?: string;
            ssl_fingerprint?: string;
            ssl_key?: string | null;
            stickiness?: "none" | "table" | "http_cookie";
        };
}

Index

Properties

200

Properties

200

"200":
    | {
        algorithm?: "roundrobin"
        | "leastconn"
        | "ring_hash";
        check?: "none" | "connection" | "http" | "http_body";
        check_attempts?: number;
        check_body?: string;
        check_interval?: number;
        check_passive?: boolean;
        check_path?: string;
        check_timeout?: number;
        cipher_suite?: string;
        id?: number;
        nodebalancer_id?: number;
        nodes_status?: { down: number; up: number };
        port?: number;
        protocol?: "udp";
        proxy_protocol?: string;
        ssl_cert?: string | null;
        ssl_commonname?: string;
        ssl_fingerprint?: string;
        ssl_key?: string | null;
        stickiness?: "none" | "session" | "source_ip";
        udp_check_port?: number;
        udp_session_timeout?: number;
    }
    | {
        algorithm?: "roundrobin"
        | "leastconn"
        | "source";
        check?: "none" | "connection" | "http" | "http_body";
        check_attempts?: number;
        check_body?: string;
        check_interval?: number;
        check_passive?: boolean;
        check_path?: string;
        check_timeout?: number;
        cipher_suite?: string;
        id?: number;
        nodebalancer_id?: number;
        nodes_status?: { down: number; up: number };
        port?: number;
        protocol?: "tcp";
        proxy_protocol?: "none" | "v1" | "v2";
        ssl_cert?: string | null;
        ssl_commonname?: string;
        ssl_fingerprint?: string;
        ssl_key?: string | null;
        stickiness?: "none" | "table" | "http_cookie";
    }
    | {
        algorithm?: "roundrobin"
        | "leastconn"
        | "source";
        check?: "none" | "connection" | "http" | "http_body";
        check_attempts?: number;
        check_body?: string;
        check_interval?: number;
        check_passive?: boolean;
        check_path?: string;
        check_timeout?: number;
        cipher_suite?: string;
        id?: number;
        nodebalancer_id?: number;
        nodes_status?: { down: number; up: number };
        port?: number;
        protocol?: "http";
        proxy_protocol?: string;
        ssl_cert?: string | null;
        ssl_commonname?: string;
        ssl_fingerprint?: string;
        ssl_key?: string | null;
        stickiness?: "none" | "table" | "http_cookie";
    }
    | {
        algorithm?: "roundrobin"
        | "leastconn"
        | "source";
        check?: "none" | "connection" | "http" | "http_body";
        check_attempts?: number;
        check_body?: string;
        check_interval?: number;
        check_passive?: boolean;
        check_path?: string;
        check_timeout?: number;
        cipher_suite?: "recommended" | "legacy";
        id?: number;
        nodebalancer_id?: number;
        nodes_status?: { down: number; up: number };
        port?: number;
        protocol?: "https";
        proxy_protocol?: string;
        ssl_cert?: string | null;
        ssl_commonname?: string;
        ssl_fingerprint?: string;
        ssl_key?: string | null;
        stickiness?: "none" | "table" | "http_cookie";
    }

NodeBalancer config options for each protocol.

Type Declaration

{
    algorithm?: "roundrobin" | "leastconn" | "ring_hash";
    check?: "none" | "connection" | "http" | "http_body";
    check_attempts?: number;
    check_body?: string;
    check_interval?: number;
    check_passive?: boolean;
    check_path?: string;
    check_timeout?: number;
    cipher_suite?: string;
    id?: number;
    nodebalancer_id?: number;
    nodes_status?: { down: number; up: number };
    port?: number;
    protocol?: "udp";
    proxy_protocol?: string;
    ssl_cert?: string | null;
    ssl_commonname?: string;
    ssl_fingerprint?: string;
    ssl_key?: string | null;
    stickiness?: "none" | "session" | "source_ip";
    udp_check_port?: number;
    udp_session_timeout?: number;
}
- Optionalalgorithm?: "roundrobin" | "leastconn" | "ring_hash"
  The algorithm this UDP NodeBalancer uses to route traffic to backends.
- Optionalcheck?: "none" | "connection" | "http" | "http_body"
  The type of check to perform against backends to ensure they are serving requests. This determines if backends are up or down.
  - If none, no check is performed.
  - connection requires only a connection to the backend to succeed.
  - http and http_body rely on the backend serving HTTP, and that the response returned matches what is expected.
- Optionalcheck_attempts?: number
  How many times to attempt a check before considering a backend to be down.
- Optionalcheck_body?: string
  This value must be present in the response body of the check in order for it to pass. If this value isn't present in the response body of a check request, the backend is considered to be down.
- Optionalcheck_interval?: number
  How often, in seconds, to check that backends are up and serving requests.
  
  Must be greater than check_timeout.
- Optional Readonlycheck_passive?: boolean
  Read-only Must be false for UDP.
- Optionalcheck_path?: string
  The URL path to check on each backend. If the backend does not respond to this request, it's considered to be down.
- Optionalcheck_timeout?: number
  How long, in seconds, to wait for a check attempt before considering it failed.
  
  Must be less than check_interval.
- Optional Readonlycipher_suite?: string
  Read-only Not applicable for udp configs.
- Optional Readonlyid?: number
  Read-only This config's unique ID.
- Optional Readonlynodebalancer_id?: number
  Read-only The ID for the NodeBalancer this config belongs to.
- Optional Readonlynodes_status?: { down: number; up: number }
  Read-only Describes the health of the backends for this port. This data updates periodically as checks are performed against backends.
  - Readonlydown: number
    Read-only The number of backends considered to be DOWN and unhealthy. These are not in rotation, and not serving requests.
  - Readonlyup: number
    Read-only The number of backends considered to be UP and healthy, and that are serving requests.
- Optionalport?: number
  This is the port the NodeBalancer listens on for this configuration. Port numbers must be unique across TCP, HTTP, and HTTPS configurations on a single NodeBalancer. However, ports assigned to TCP, HTTP, or HTTPS configurations can also be reused for UDP configurations. For example, Port 80 can simultaneously serve a TCP and a UDP configuration on the same NodeBalancer, but it can't be shared by both a TCP and an HTTP configuration. Although certain ports are traditionally associated with specific protocols, this isn't strictly enforced, and you may configure your NodeBalancer however you find useful.
- Optionalprotocol?: "udp"
  The protocol the port is configured to serve, udp in this case. Review our guide on Available Protocols for information on protocol features.
- Optional Readonlyproxy_protocol?: string
  Read-only Must be none for UDP.
- Optional Readonlyssl_cert?: string | null
  Read-only Not applicable for UDP configs.
- Optional Readonlyssl_commonname?: string
  Read-only Not applicable for UPD configs.
- Optional Readonlyssl_fingerprint?: string
  Read-only Not applicable for UDP configs.
- Optional Readonlyssl_key?: string | null
  Read-only Not applicable for UDP configs.
- Optionalstickiness?: "none" | "session" | "source_ip"
  Controls how session stickiness is handled on this port.
  - If set to none, connections are assigned a backend server based on the algorithm configured.
  - If set to session, all packets with the same session identifiers are routed to the same backend server. Two packets are considered part of the same session if they share the same source and destination IP addresses or ports, and are received within a short time window.
  - If set to source_ip, the NodeBalancer uses the client's source IP address to route all packets from the same client to the same backend server.
- Optionaludp_check_port?: number
  UDP NodeBalancers use TCP and HTTP active health checks to ensure back-end nodes can receive traffic. You can specify the health check port that the backend node listens on, which may differ from the UDP port used to serve traffic.
- Optional Readonlyudp_session_timeout?: number
  Read-only The maximum duration in seconds, a UDP session can be idle before it is closed.
{
    algorithm?: "roundrobin" | "leastconn" | "source";
    check?: "none" | "connection" | "http" | "http_body";
    check_attempts?: number;
    check_body?: string;
    check_interval?: number;
    check_passive?: boolean;
    check_path?: string;
    check_timeout?: number;
    cipher_suite?: string;
    id?: number;
    nodebalancer_id?: number;
    nodes_status?: { down: number; up: number };
    port?: number;
    protocol?: "tcp";
    proxy_protocol?: "none" | "v1" | "v2";
    ssl_cert?: string | null;
    ssl_commonname?: string;
    ssl_fingerprint?: string;
    ssl_key?: string | null;
    stickiness?: "none" | "table" | "http_cookie";
}
- Optionalalgorithm?: "roundrobin" | "leastconn" | "source"
  The algorithm this TCP NodeBalancer uses to route traffic to backends.
- Optionalcheck?: "none" | "connection" | "http" | "http_body"
  The type of check to perform against backends to ensure they are serving requests. This determines if backends are up or down.
  - If none, no check is performed.
  - connection requires only a connection to the backend to succeed.
  - http and http_body rely on the backend serving HTTP, and that the response returned matches what is expected.
- Optionalcheck_attempts?: number
  How many times to attempt a check before considering a backend to be down.
- Optionalcheck_body?: string
  This value must be present in the response body of the check in order for it to pass. If this value is not present in the response body of a check request, the backend is considered to be down.
- Optionalcheck_interval?: number
  How often, in seconds, to check that backends are up and serving requests.
  
  Must be greater than check_timeout.
- Optionalcheck_passive?: boolean
  If true, any response from this backend with a 5xx status code is enough for it to be considered unhealthy and taken out of rotation.
- Optionalcheck_path?: string
  The URL path to check on each backend. If the backend does not respond to this request, it's considered to be down.
- Optionalcheck_timeout?: number
  How long, in seconds, to wait for a check attempt before considering it failed.
  
  Must be less than check_interval.
- Optional Readonlycipher_suite?: string
  Read-only Not applicable for tcp configs.
- Optional Readonlyid?: number
  Read-only This config's unique ID.
- Optional Readonlynodebalancer_id?: number
  Read-only The ID for the NodeBalancer this config belongs to.
- Optional Readonlynodes_status?: { down: number; up: number }
  Read-only Describes the health of the backends for this port. This data updates periodically as checks are performed against backends.
  - Readonlydown: number
    Read-only The number of backends considered to be DOWN and unhealthy. These are not in rotation, and not serving requests.
  - Readonlyup: number
    Read-only The number of backends considered to be UP and healthy, and that are serving requests.
- Optionalport?: number
  This is the port the NodeBalancer listens on for this configuration. Port numbers must be unique across TCP, HTTP, and HTTPS configurations on a single NodeBalancer. However, ports assigned to TCP, HTTP, or HTTPS configurations can also be reused for UDP configurations. For example, Port 80 can simultaneously serve a TCP and a UDP configuration on the same NodeBalancer, but it can't be shared by both a TCP and an HTTP configuration. Although certain ports are traditionally associated with specific protocols, this isn't strictly enforced, and you may configure your NodeBalancer however you find useful.
- Optionalprotocol?: "tcp"
  The protocol the port is configured to serve, tcp in this case. Review our guide on Available protocols for information on protocol features.
- Optionalproxy_protocol?: "none" | "v1" | "v2"
  Proxy protocol is a TCP extension that sends initial TCP connection information such as source or destination IPs and ports to backend devices. Proxy protocol preserves initial TCP information that would be lost otherwise. Backend devices must be configured to work with proxy_protocol if enabled.
  - If omitted, or set to none, the NodeBalancer doesn't send any auxiliary data over TCP connections. This is the default.
  - If set to v1, the human-readable header format (Version 1) is used. Requires tcp protocol.
  - If set to v2, the binary header format (Version 2) is used. Requires tcp protocol.
- Optional Readonlyssl_cert?: string | null
  Read-only Not applicable for TCP configs.
- Optional Readonlyssl_commonname?: string
  Read-only Not applicable for TCP configs.
- Optional Readonlyssl_fingerprint?: string
  Read-only Not applicable for TCP configs.
- Optional Readonlyssl_key?: string | null
  Read-only Not applicable for HTTP configs.
- Optionalstickiness?: "none" | "table" | "http_cookie"
  Read-only Controls how session stickiness is handled on this port.
  
  Not applicable to TCP configurations.
{
    algorithm?: "roundrobin" | "leastconn" | "source";
    check?: "none" | "connection" | "http" | "http_body";
    check_attempts?: number;
    check_body?: string;
    check_interval?: number;
    check_passive?: boolean;
    check_path?: string;
    check_timeout?: number;
    cipher_suite?: string;
    id?: number;
    nodebalancer_id?: number;
    nodes_status?: { down: number; up: number };
    port?: number;
    protocol?: "http";
    proxy_protocol?: string;
    ssl_cert?: string | null;
    ssl_commonname?: string;
    ssl_fingerprint?: string;
    ssl_key?: string | null;
    stickiness?: "none" | "table" | "http_cookie";
}
- Optionalalgorithm?: "roundrobin" | "leastconn" | "source"
  The algorithm this HTTP NodeBalancer uses for routing traffic to backends.
- Optionalcheck?: "none" | "connection" | "http" | "http_body"
  The type of check to perform against backends to ensure they are serving requests. This determines if backends are up or down.
  - If none, no check is performed.
  - connection requires only a connection to the backend to succeed.
  - http and http_body rely on the backend serving HTTP, and that the response returned matches what is expected.
- Optionalcheck_attempts?: number
  How many times to attempt a check before considering a backend to be down.
- Optionalcheck_body?: string
  Use when the active health check type is http_body. This value needs to be in the response body of the check in order for it to pass. Otherwise the backend is considered to be down.
- Optionalcheck_interval?: number
  How often, in seconds, to check that backends are up and serving requests.
  
  Must be greater than check_timeout.
- Optionalcheck_passive?: boolean
  If true, any response from this backend with a 5xx status code will be enough for it to be considered unhealthy and taken out of rotation.
- Optionalcheck_path?: string
  The URL path to check on each backend. Use when the active health check type is http. If the backend doesn't respond to this request, it's considered to be down.
- Optionalcheck_timeout?: number
  How long, in seconds, to wait for a check attempt before considering it failed.
  
  Must be less than check_interval.
- Optional Readonlycipher_suite?: string
  Read-only Not applicable for http configs.
- Optional Readonlyid?: number
  Read-only This config's unique ID.
- Optional Readonlynodebalancer_id?: number
  Read-only Identifies the NodeBalancer this config belongs to.
- Optional Readonlynodes_status?: { down: number; up: number }
  Read-only Describes the health of the backends for this port. This data updates periodically as checks are performed against backends.
  - Readonlydown: number
    Read-only The number of backends considered to be DOWN and unhealthy. These are not in rotation, and not serving requests.
  - Readonlyup: number
    Read-only The number of backends considered to be UP and healthy, and that are serving requests.
- Optionalport?: number
  This is the port the NodeBalancer listens on for this configuration. Port numbers need to be unique across TCP, HTTP, and HTTPS configurations on a single NodeBalancer. However, ports assigned to TCP, HTTP, or HTTPS configurations can also be reused for UDP configurations. For example, Port 80 can simultaneously serve a TCP and a UDP configuration on the same NodeBalancer, but it can't be shared by both a TCP and an HTTP configuration. Although certain ports are traditionally associated with specific protocols, this isn't strictly enforced. You may configure your NodeBalancer however you find useful.
- Optionalprotocol?: "http"
  The protocol the port is configured to serve, http in this case. Review our guide on Available protocols for information on protocol features.
- Optional Readonlyproxy_protocol?: string
  Read-only Not applicable for HTTP configs.
- Optional Readonlyssl_cert?: string | null
  Read-only Not applicable for HTTP configs.
- Optional Readonlyssl_commonname?: string
  Read-only Not applicable for HTTP configs.
- Optional Readonlyssl_fingerprint?: string
  Read-only Not applicable for HTTP configs.
- Optional Readonlyssl_key?: string | null
  Read-only Not applicable for HTTP configs.
- Optionalstickiness?: "none" | "table" | "http_cookie"
  Controls how session stickiness is handled on this port.
  - If set to none, connections are always assigned a backend based on the algorithm configured.
  - If set to table, sessions from the same remote address are routed to the same backend.
  - If set to http_cookie, sessions are routed to the same backend based on a cookie set by the NodeBalancer.
{
    algorithm?: "roundrobin" | "leastconn" | "source";
    check?: "none" | "connection" | "http" | "http_body";
    check_attempts?: number;
    check_body?: string;
    check_interval?: number;
    check_passive?: boolean;
    check_path?: string;
    check_timeout?: number;
    cipher_suite?: "recommended" | "legacy";
    id?: number;
    nodebalancer_id?: number;
    nodes_status?: { down: number; up: number };
    port?: number;
    protocol?: "https";
    proxy_protocol?: string;
    ssl_cert?: string | null;
    ssl_commonname?: string;
    ssl_fingerprint?: string;
    ssl_key?: string | null;
    stickiness?: "none" | "table" | "http_cookie";
}
- Optionalalgorithm?: "roundrobin" | "leastconn" | "source"
  The algorithm this HTTPS NodeBalancer uses for routing traffic to backends.
- Optionalcheck?: "none" | "connection" | "http" | "http_body"
  The type of check to perform against backends to ensure they are serving requests. The check is used to determine if backends are up or down.
  - If none no check is performed.
  - connection requires only a connection to the backend to succeed.
  - http and http_body rely on the backend serving HTTP, and that the response returned matches what is expected.
- Optionalcheck_attempts?: number
  How many times to attempt a check before considering a backend to be down.
- Optionalcheck_body?: string
  Use when the active health check type is http_body. This value must be present in the response body of the check in order for it to pass. If this value is not present in the response body of a check request, the backend is considered to be down.
- Optionalcheck_interval?: number
  The number of seconds between each check that backends are up and serving requests.
  
  Must be greater than check_timeout.
- Optionalcheck_passive?: boolean
  If true, any response from this backend with a 5xx status code will be enough for it to be considered unhealthy and taken out of rotation.
- Optionalcheck_path?: string
  The URL path to check on each backend. Use when the active health check type is http. If the backend doesn't respond to this request, it's considered to be down.
- Optionalcheck_timeout?: number
  How long, in seconds, to wait for a check attempt before considering it failed.
  
  Must be less than check_interval.
- Optionalcipher_suite?: "recommended" | "legacy"
  What ciphers to use for SSL connections served by this NodeBalancer. The legacy cipher is considered insecure and should only be used if necessary. For information on recommended and legacy ciphers, see TLS cipher suites.
- Optional Readonlyid?: number
  Read-only This config's unique ID.
- Optional Readonlynodebalancer_id?: number
  Read-only The ID for the NodeBalancer this config belongs to.
- Optional Readonlynodes_status?: { down: number; up: number }
  Read-only Describes the health of the backends for this port. This data updates periodically as checks are performed against backends.
  - Readonlydown: number
    Read-only The number of backends considered to be DOWN and unhealthy. These are not in rotation, and not serving requests.
  - Readonlyup: number
    Read-only The number of backends considered to be UP and healthy, and that are serving requests.
- Optionalport?: number
  This is the port the NodeBalancer listens on for this configuration. Port numbers must be unique across TCP, HTTP, and HTTPS configurations on a single NodeBalancer. However, ports assigned to TCP, HTTP, or HTTPS configurations can also be reused for UDP configurations. For example, Port 80 can simultaneously serve a TCP and a UDP configuration on the same NodeBalancer, but it can't be shared by both a TCP and an HTTP configuration. Although certain ports are traditionally associated with specific protocols, this isn't strictly enforced, and you may configure your NodeBalancer however you find useful.
- Optionalprotocol?: "https"
  The protocol the port is configured to serve, https in this case. Review our guide on Available protocols for information on protocol features. The https protocol needs to be specified with both ssl_cert and ssl_key.
- Optional Readonlyproxy_protocol?: string
  Read-only Not applicable for HTTPS configs.
- Optionalssl_cert?: string | null
  The PEM-formatted public SSL certificate (or the combined PEM-formatted SSL certificate and Certificate Authority chain) that should be served on this NodeBalancerConfig's port.
  
  Line breaks must be represented as \n in the string for requests (but not when using the Linode CLI).
  
  Diffie-Hellman Parameters can be included in this value to enable forward secrecy.
  
  The contents of this field will not be shown in any responses that display the NodeBalancerConfig. Instead, <REDACTED> will be printed where the field appears.
  
  The read-only ssl_commonname and ssl_fingerprint fields in a NodeBalancerConfig response are automatically derived from your certificate. Please refer to these fields to verify that the appropriate certificate was assigned to your NodeBalancerConfig.
- Optional Readonlyssl_commonname?: string
  Read-only The read-only common name automatically derived from the SSL certificate assigned to this NodeBalancerConfig. Please refer to this field to verify that the appropriate certificate is assigned to your NodeBalancerConfig.
- Optional Readonlyssl_fingerprint?: string
  Read-only The read-only SHA1-encoded fingerprint automatically derived from the SSL certificate assigned to this NodeBalancer configuration. Please refer to the ssl_fingerprint field to verify that the appropriate certificate is assigned to your NodeBalancer configuration.
- Optionalssl_key?: string | null
  The PEM-formatted private key for the SSL certificate set in the ssl_cert field.
  
  Line breaks must be represented as \n in the string for requests (but not when using the Linode CLI).
  
  The contents of this field will not be shown in any responses that display the NodeBalancerConfig. Instead, <REDACTED> will be printed where the field appears.
  
  The read-only ssl_commonname and ssl_fingerprint fields in a NodeBalancerConfig response are automatically derived from your certificate. Please refer to these fields to verify that the appropriate certificate was assigned to your NodeBalancerConfig.
- Optionalstickiness?: "none" | "table" | "http_cookie"
  Controls how session stickiness is handled on this port.
  - If set to none, connections will always be assigned a backend based on the algorithm configured.
  - If set to table, sessions from the same remote address will be routed to the same backend.
  - For HTTP or HTTPS clients, http_cookie allows sessions to be routed to the same backend based on a cookie set by the NodeBalancer.

Type Alias PostRebuildNodeBalancerConfigResponses

Index

Properties

Properties

200

Type Declaration

Optionalalgorithm?: "roundrobin" | "leastconn" | "ring_hash"

Optionalcheck?: "none" | "connection" | "http" | "http_body"

Optionalcheck_attempts?: number

Optionalcheck_body?: string

Optionalcheck_interval?: number

Optional Readonlycheck_passive?: boolean

Optionalcheck_path?: string

Optionalcheck_timeout?: number

Optional Readonlycipher_suite?: string

Optional Readonlyid?: number

Optional Readonlynodebalancer_id?: number

Optional Readonlynodes_status?: { down: number; up: number }

Readonlydown: number

Readonlyup: number

Optionalport?: number

Optionalprotocol?: "udp"

Optional Readonlyproxy_protocol?: string

Optional Readonlyssl_cert?: string | null

Optional Readonlyssl_commonname?: string

Optional Readonlyssl_fingerprint?: string

Optional Readonlyssl_key?: string | null

Optionalstickiness?: "none" | "session" | "source_ip"

Optionaludp_check_port?: number

Optional Readonlyudp_session_timeout?: number

Optionalalgorithm?: "roundrobin" | "leastconn" | "source"

Optionalcheck?: "none" | "connection" | "http" | "http_body"

Optionalcheck_attempts?: number

Optionalcheck_body?: string

Optionalcheck_interval?: number

Optionalcheck_passive?: boolean

Optionalcheck_path?: string

Optionalcheck_timeout?: number

Optional Readonlycipher_suite?: string

Optional Readonlyid?: number

Optional Readonlynodebalancer_id?: number

Optional Readonlynodes_status?: { down: number; up: number }

Readonlydown: number

Readonlyup: number

Optionalport?: number

Optionalprotocol?: "tcp"

Optionalproxy_protocol?: "none" | "v1" | "v2"

Optional Readonlyssl_cert?: string | null

Optional Readonlyssl_commonname?: string

Optional Readonlyssl_fingerprint?: string

Optional Readonlyssl_key?: string | null

Optionalstickiness?: "none" | "table" | "http_cookie"

Optionalalgorithm?: "roundrobin" | "leastconn" | "source"

Optionalcheck?: "none" | "connection" | "http" | "http_body"

Optionalcheck_attempts?: number

Optionalcheck_body?: string

Optionalcheck_interval?: number

Optionalcheck_passive?: boolean

Optionalcheck_path?: string

Optionalcheck_timeout?: number

Optional Readonlycipher_suite?: string

Optional Readonlyid?: number

Optional Readonlynodebalancer_id?: number

Optional Readonlynodes_status?: { down: number; up: number }

Readonlydown: number

Readonlyup: number

Optionalport?: number

Optionalprotocol?: "http"

Optional Readonlyproxy_protocol?: string

Optional Readonlyssl_cert?: string | null

Optional Readonlyssl_commonname?: string

Optional Readonlyssl_fingerprint?: string

Optional Readonlyssl_key?: string | null

Optionalstickiness?: "none" | "table" | "http_cookie"

Optionalalgorithm?: "roundrobin" | "leastconn" | "source"

Optionalcheck?: "none" | "connection" | "http" | "http_body"

Optionalcheck_attempts?: number

Optionalcheck_body?: string

Optionalcheck_interval?: number

Optionalcheck_passive?: boolean

`Optional`algorithm?: "roundrobin" | "leastconn" | "ring_hash"

`Optional`check?: "none" | "connection" | "http" | "http_body"

`Optional`check_attempts?: number

`Optional`check_body?: string

`Optional`check_interval?: number

`Optional` `Readonly`check_passive?: boolean

`Optional`check_path?: string

`Optional`check_timeout?: number

`Optional` `Readonly`cipher_suite?: string

`Optional` `Readonly`id?: number

`Optional` `Readonly`nodebalancer_id?: number

`Optional` `Readonly`nodes_status?: { down: number; up: number }

`Readonly`down: number

`Readonly`up: number

`Optional`port?: number

`Optional`protocol?: "udp"

`Optional` `Readonly`proxy_protocol?: string

`Optional` `Readonly`ssl_cert?: string | null

`Optional` `Readonly`ssl_commonname?: string

`Optional` `Readonly`ssl_fingerprint?: string

`Optional` `Readonly`ssl_key?: string | null

`Optional`stickiness?: "none" | "session" | "source_ip"

`Optional`udp_check_port?: number

`Optional` `Readonly`udp_session_timeout?: number

`Optional`algorithm?: "roundrobin" | "leastconn" | "source"

`Optional`check?: "none" | "connection" | "http" | "http_body"

`Optional`check_attempts?: number

`Optional`check_body?: string

`Optional`check_interval?: number

`Optional`check_passive?: boolean

`Optional`check_path?: string

`Optional`check_timeout?: number

`Optional` `Readonly`cipher_suite?: string

`Optional` `Readonly`id?: number

`Optional` `Readonly`nodebalancer_id?: number

`Optional` `Readonly`nodes_status?: { down: number; up: number }

`Readonly`down: number

`Readonly`up: number

`Optional`port?: number

`Optional`protocol?: "tcp"

`Optional`proxy_protocol?: "none" | "v1" | "v2"

`Optional` `Readonly`ssl_cert?: string | null

`Optional` `Readonly`ssl_commonname?: string

`Optional` `Readonly`ssl_fingerprint?: string

`Optional` `Readonly`ssl_key?: string | null

`Optional`stickiness?: "none" | "table" | "http_cookie"

`Optional`algorithm?: "roundrobin" | "leastconn" | "source"

`Optional`check?: "none" | "connection" | "http" | "http_body"

`Optional`check_attempts?: number

`Optional`check_body?: string

`Optional`check_interval?: number

`Optional`check_passive?: boolean

`Optional`check_path?: string

`Optional`check_timeout?: number

`Optional` `Readonly`cipher_suite?: string

`Optional` `Readonly`id?: number

`Optional` `Readonly`nodebalancer_id?: number

`Optional` `Readonly`nodes_status?: { down: number; up: number }

`Readonly`down: number

`Readonly`up: number

`Optional`port?: number

`Optional`protocol?: "http"

`Optional` `Readonly`proxy_protocol?: string

`Optional` `Readonly`ssl_cert?: string | null

`Optional` `Readonly`ssl_commonname?: string

`Optional` `Readonly`ssl_fingerprint?: string

`Optional` `Readonly`ssl_key?: string | null

`Optional`stickiness?: "none" | "table" | "http_cookie"

`Optional`algorithm?: "roundrobin" | "leastconn" | "source"

`Optional`check?: "none" | "connection" | "http" | "http_body"

`Optional`check_attempts?: number

`Optional`check_body?: string

`Optional`check_interval?: number

`Optional`check_passive?: boolean

`Optional`check_path?: string

`Optional`check_timeout?: number

`Optional`cipher_suite?: "recommended" | "legacy"

`Optional` `Readonly`id?: number

`Optional` `Readonly`nodebalancer_id?: number

`Optional` `Readonly`nodes_status?: { down: number; up: number }